Full-Depth Asphalt Reclamation, Modesto, CA

We utilize advanced reclaimer-stabilizer equipment to process existing asphalt pavement directly on your site. This in-place recycling method eliminates the need for heavy trucks to haul old material away, reducing both your project costs and the overall environmental impact.

Our crews incorporate cementitious additives like lime or Portland cement during the pulverization process. This chemical stabilization transforms weak subgrade soils into a rigid, homogenous base layer that significantly increases the load-bearing capacity for heavy industrial truck traffic areas.

By pulverizing the entire depth of the failed asphalt, we remove the existing crack patterns entirely. This prevents reflective cracking from migrating through to the new surface, a common problem when performing a standard Commercial asphalt overlay.

We address deep-seated structural issues by reaching into the subgrade during the reclamation process. This allows us to perform Base failure repair At a fundamental level, ensuring the new pavement rests on a compacted foundation.

During the pulverization and blending phase, we utilize laser levels to correct slopes. This ensures that the final surface meets all ADA compliance accessibility paving Requirements for path of travel and parking stall slopes in Modesto.

The stabilized base created through reclamation is significantly stronger than traditional aggregate. This allows your parking lot to handle the heavy traffic loads found at a Distribution center paving Project without the risk of future rutting or base failure.

By reusing 100% of the existing pavement materials, you eliminate the high costs of asphalt removal and haul-off. This makes full-depth reclamation a highly cost-effective solution for large-scale Warehouse yard paving And industrial facility parking areas.

The reclamation process is much faster than traditional dig-and-replace methods. We can stabilize large areas quickly, allowing your business to return to normal operations sooner. This efficiency is ideal for high-traffic retail centers and busy office park environments.

In-place recycling conserves energy and natural resources by reducing the need for new aggregate and virgin asphalt. This sustainable approach lowers the carbon footprint of your project while delivering a high-performance surface that meets modern green building standards.

A stabilized base prevents the moisture infiltration and reflective cracking that lead to premature failure. This extends the overall pavement service life, ensuring that your investment in a new asphalt surface remains protected against the elements for decades.

Full-depth reclamation is a rehabilitation technique where the entire asphalt layer and a portion of the base are pulverized and mixed with binders. This creates a new, stabilized base course for a fresh surface, reusing all existing pavement materials.

Costs vary based on the project size and required additives. However, it is generally much cheaper than full reconstruction because it eliminates haul-off fees and the need for new aggregate. We provide detailed estimates following a thorough site assessment.

Asphalt milling only removes the top few inches of the surface. Full-depth reclamation pulverizes the entire asphalt section and the base underneath. Reclamation is used when the structural foundation has failed, while milling addresses only surface-level cosmetic issues.

The process typically reaches depths of 6 to 12 inches. This ensures we incorporate the full thickness of the old asphalt and enough of the underlying aggregate base to create a truly homogenous and stabilized structural layer for paving.

We commonly use cement, lime, kiln dust, or emulsified asphalt as binders. The choice depends on the soil composition and the expected traffic loads. These additives chemically stabilize the pulverized materials, creating a rigid and durable foundation layer.